OPEN AS USUAL! - SumoPower remains open & is available on getting your orders shipped! - Our website shows LIVE STOCK LEVELS with up-to-date information! - Our phone lines & Contact E-Mails are available for your needs and requests! Please note that there may be a slight delay in getting back to you due higher demands!

Radium: Fuel Pump Inlet Adapter

Radium: Fuel Pump Inlet Adapter
Radium: Fuel Pump Inlet Adapter

Radium: Fuel Pump Inlet Adapter

No items available to display


Ships in 1 week

The fuel pump inlet adapter kit is split into two parts; the fuel pump inlet adapter and the fuel tank pickup.

photo fpiaimg1_zpsh7fdosed.jpg

The materials in these products are compliant and safe to be used in all gas types including alcohol fuels such as ethanol and E85. Installation instructions are included.

20-0145 FUEL PUMP INLET ADAPTER


The 20-0145 Fuel Pump Inlet Adapter is used for remote mounting a fuel filter inside a fuel tank or fuel cell. It should NOT be used as a secondary external inline fuel pump. It uses an anodized billet aluminum adapter that secures to the pump inlet with a star washer and a unique preloaded stainless steel bracket design. The billet adapter uses a machined barbed nipple and features an integrated O-ring for sealing. The fuel pump inlet adapter is compatible with the following popular in-tank fuel pumps.

-Walbro GSS341 255LPH Fuel Pump
-Walbro GSS342 255LPH Fuel Pump
-Walbro F9000262 Gas Fuel Pump
-Walbro F9000267 E85 Fuel Pump
-AEM 50-1000 Gas Fuel Pump
-AEM 50-1200 E85 Fuel Pump
-Aeromotive 340R 11141 Fuel Pump
-Aeromotive 340R 11142 Fuel Pump
-Deatschwerks 9-301-1000 Fuel Pump

There are many other pumps that can be used (not listed) that use this same inlet design.

photo fpiaimg2_zpsl7ghqmey.jpg

20-0154 FUEL TANK PICKUP KIT


The 20-0154 Fuel Tank Pickup Kit was designed to work in conjunction with the 20-0145 Fuel Pump Inlet Adapter for when an internal pump is mounted above the fluid level of the fuel tank or fuel cell. Included is a 2-1/4" OD x 1-1/2" tall mesh fuel filter with a barb adapter that is placed at the bottom of the tank. The fuel filter features a 100 mesh made from 304 stainless steel. This kit is extensively used with the Radium FCST when using a 11" or deeper fuel cell.

photo fpiaimg3_zps4ctqfxzv.jpg

Two different pickup tubes are included and are used depending on the depth of the fuel cell.

photo fpiaimg4_zpsldjm4rmu.jpg

For Radium FCST users with a 11"-15" deep fuel cell, the 6" long PTFE tube can be used. This black rigid tube can be cut to exact length in order to sandwich the filter at the bottom of the fuel cell locating it directly underneath the pump, as shown above. For Radium FCST users with 15" or deeper fuel cells, the 13" long convoluted PTFE tube can be used, as shown below.

photo fpiaimg5_zpseceyg8sr.jpg

To protect the pickup from fuel slosh, strategically locate the mesh fuel filter in the tank or preferrably place it in this Radium Collector Box if fuel starvation is an issue.

Stock images used. Actual product may vary.

We have placed cookies on your device to help make this website better.

Ok